





A. Introduction
This infrared thermometer is used for measuring the temperature of the object’s surface, which is applicable for various hot, hazardous of hard-to-reach objects without contact safely and quickly.
This unit consist of Optics, Temperature sensor signal amplifier, processing circuit and LCD display. The optics collected the infrared energy emitted by object and focus onto the sensor. Then the sensor translates the energy into an electricity signal. This signal will be turned out to be digital shown on the LCD after the signal amplifier and processing circuit.
B. Functions:
1. Celsius / Fahrenheit switchable
2. Equipped with a laser for aiming
3. Temperature hold
4. LCD backlight
5. 20 seconds auto power off
6. Light weight and easy operation
C. Specification
| Temperature Range | -50°C~550°C(-58°F~1022°F) |
| Accuracy | *0°C~550°C(32°F~1022°F): ±1.5°C(±2.7°F) or±1.5%
*-50°C~0°C(-58°F~32°F): ±3°C(±5°F) Whichever is greater |
| Resolution | 0.1°C or 0.1°F |
| Repeatability | 1% of reading or 1 °C |
| Response time | 500 mSec, 95% response |
| Spectral response | 8~14 um |
| Emissivity | 0.95 Preset |
| Distance to Spot size | 12:1 |
| Operating Temperature | 0°C~40°C(32°F~104°F) |
| Operating Humidity | 10~95% RH non-condensing up to 30°C(86°F) |
| Storage Temperature | -20~60°C(-4°F~140°F) |
| Power | 9V battery |
| Typical battery life | Non-laser mode: 22 hrs;
Laser mode: 12 hrs |
| Weight | 147.5g |
| Dimension | 153x101x43mm |
b. Locating a hot spot
c. Distance to spot size When take measurement, pay attention to the Distance to spot size. As the Distance (D) from the target surface increases, the spot size (S) of the area measured by the unit becomes larger. *****This unit is equipped with a laser, which is used for aiming.
Make sure the target is larger than the unit’s spot size. The smaller the target the closer measure distance. When accuracy is critical, make sure the target is at least twice as large as the spot sise. d. About the Emissivity: Most organic materials and painted or oxidized surfaces have an emissivity of 0.95 (pre-set in the unit). Inaccurate readings will result from measuring shiny of polished metal surfaces. To compensate, cover the target surface with masking tape or flat black paint. Measure the tape or painted surface when the tape of painted reach the same temperature as the material underneath.
E. Packing information Packing: Blister + Card Standard Quantity Per Carton: 60pcs Standard Carton Sise: 52×42.3×48.5CM Standard Carton Gross Weight: 15.2KG Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....
| Thương hiệu | OEM |
|---|---|
| SKU | 7510613273454 |