Dụng cụ nhấn cáp Dintek Punch down tool (6103-01001)

Giới thiệu Dụng cụ nhấn cáp Dintek Punch down tool (6103-01001)

Punch down tool – dụng cụ nhấn cáp vào patch panel & Keystone Jack
DINTEK 110 Punchdown Termination Tool

- If you're going to be terminating our RJ45 jacks without the use of the ezi-TOOL , or you need to terminate wires onto a 110 block, you're going to need a good punch down tool. DINTEK’s Single wire 110 Punchdown tool allows for the best possible termination via the 110 impact system on to IDC terminations.
Applications
- Terminating wires onto 110 style block connectors
- Terminating Category 3 twisted pair RJ45 voice jacks
- Terminating Category 5e & Category 6 RJ45 Jacks
Features
- Suitable for 110 cross-connect systems
- Suitable for punch and cut or punch only
- Compact body for easy storage in your tool box, tool bag, or pocket
- Spring-loaded design provides a low-effort wire seating & termination
- Internal impact mechanism eliminates jamming
- In-handle blade storage compartment
- Uses standard twist and lock 110 blades for terminations
- Sản xuất tại Taiwan.
=========================================================================
Liên hệ ĐT hoặc zalo số  0949.10.22.88 (Ms. Hòa) hoặc 0915.00.44.77 (Ms. Trâm) hoặc 0903.888.272 (Ms. Linh) để được hổ trợ.
Địa chỉ kho hàng: 160/1/67 Phan Huy Ích, P.12, Q. Gò Vấp, Tp Hồ Chí Minh
Giá BLUES